Envío gratis en pedidos de más de $100 
Retiro en la tienda para precios más bajos en ciertos artículos
Roshun F.
- Rating:
Recommends this product
Excellent item. Sturdy and light weight.
Portaequipaje de aluminio de 60 in
Ten en cuenta
- No disponible para envíos a Canadá.
Descripción
Descripción del producto
- Número de pieza:
- 524ACC
Para enganches de 2 in. Capacidad de carga AC de 500 lb. Construido en aluminio de peso liviano, buena apariencia; no se oxida. Transporta hasta 500 lb si el enganche tiene una calificación de 500 lb. El producto de aluminio totalmente soldado no requiere ensamblaje.
- Para receptores de enganche de 2 in
- Aluminio soldado
- Capacidad de carga de 500 lb
- Dimensiones internas del portaequipaje: 59-5/8 in x 23-5/8 in x 2-3/4 in
- Dimensiones externas del portaequipaje: 60 in x 24 in x 3 in
Comentarios (28)
Rob D.
- Rating:
Recommends this product
Excellent customer service! Delivery a little slow but expected with Covid. Product quality is better than expected. Very pleased. This is not China junk. USA USA USA
JOHN G.
- Rating:
Recommends this product
Good size, welded construction. Strong. I believe hardware was zinc, stainless would of been more appropriate. Excellent value.
Andrew E.
- Rating:
Recommends this product
MADE IN THE USA! Quality welds and material used to fabricate this cargo carrier.
don a.
- Rating:
Recommends this product
1st use, 300 miles with no issue. Like it's light weight. Wish it had tie down loops of some sort. Welds look a bit sloppy.
Questions & Answers (21)
Questions & Answers (21)
Product Description
- Part Number:
- 524ACC
For 2" hitches. 500 lbs load capacity AC. Made of aluminum for light weight, nice appearance, and no rust. Will carry up to 500 lbs if hitch is rated for 500 lbs. All welded aluminum product needs no assembling.
- For 2" hitch receivers
- Welded aluminum
- 500 lbs load capacity
- Interior carrier dimensions: 59-5/8” x 23-5/8” x 2-3/4”
- Exterior carrier dimensions: 60” x 24” x 3”
Cargo Carrier 60” Aluminum Reviews (28)
Roshun F.
- Rating:
Recommends this product
Excellent item. Sturdy and light weight.
Rob D.
- Rating:
Recommends this product
Excellent customer service! Delivery a little slow but expected with Covid. Product quality is better than expected. Very pleased. This is not China junk. USA USA USA
JOHN G.
- Rating:
Recommends this product
Good size, welded construction. Strong. I believe hardware was zinc, stainless would of been more appropriate. Excellent value.
Andrew E.
- Rating:
Recommends this product
MADE IN THE USA! Quality welds and material used to fabricate this cargo carrier.
don a.
- Rating:
Recommends this product
1st use, 300 miles with no issue. Like it's light weight. Wish it had tie down loops of some sort. Welds look a bit sloppy.
Questions & Answers (21)
Is the deck solid or expanded aluminum
Hi Doug. The surface of the tray is expanded aluminum to allow debris and water to pass through. Have a great day!
I want to carry a SnoDog on this which is 56”x25” can it be returned if the SnoDog doesn’t fit ?
Hi Glenn, you can do a return however the inner dimensions are 59-5/8” x 23-5/8” x 2-3/4” so this one might be a tad small to set your SnoDog in.
Where is the carrier made? And how long is the hitch tongue?
Hello, Gary! This carrier was made in the USA. The distance from the center of the hitch pin hole to the carrier platform is 6". I hope that is helpful!
How much does it weigh?
Hey, Michael! This cargo carrier weighs 34 pounds. Thanks for asking!
Can you make aluminum hitch cargo carrier 70 inch long " 30 inch wide X 6-12 inch deep
Hi, Mike! Unfortunately, we do not offer any cargo carriers of that size. We apologize for the inconvenience!
What is the distance from hitch pin to basket?
Hello, Tim! The distance is 6 inches from the pin hole to the basket. I hope that is helpful!
I will be traveling with a power wheelchair due to my mobility issues I want a cargo van and I need a lift or a ramp 4 my Mobility device
Hi, Toni! Please see our selection of Wheelchair Carriers & Mobility Lifts. Thank you!
Is there any assembly required? Wondering about rattling going down the road...
Hi, Kristen! Besides attaching the carrier to your receiver hitch, this cargo carrier requires no assembly. Thank you!
How much does it weigh?
Hello! The carrier itself weighs about 35 pounds. Thanks for asking!
Can I have something like this to my 2002 Mitsubishi spyder?
Hello, Rose! This particular cargo carrier can be used with any vehicle equipped with a 2" receiver hitch. If your vehicle is not already equipped with a 2" receiver hitch, please visit your local U-Haul Hitch Center to have the appropriate hitch installed onto your vehicle. Thank you!
I would like to know if one can haul a motorcycle on these. In other words, I have an SUV and wonder if there would be a clearance problem. I have the shorter extension on my hitch. Can you tell me the distance from the ball to the farthest point on the platform? Thanks for your help.
Hello, Matt! No, we do not recommend using a cargo carrier to carry a motorcycle. Please consider renting a U-Haul motorcycle trailer for carrying a motorcycle. Thank you!
What are the inside measurements for the basket?
Hey, Larry! The inner dimensions of this cargo carrier are 60" x 24" x 3". Thank you!
How many bolts are included which would connect carrier to car hitch ? I have a 2" U-Haul installed trailer hitch on my 2014 Subaru Ouitback and wnt to be sure that this carrier is compatible with hitch and that bolts will work. Thank You !
Hi, Douglas! Please use the U-Haul Class III pin & Clip to secure your reciever hitch. Thank you!
Is there a ramp to mount a small scooter
Hi, Eduardo! We offer a variety of wheelchair carriers and mobility lifts. For a small scooter, we recommend the manual scooter and power chair universal lift. I hope that is helpful!
Can I use this on a Class 1 (200 lb) hitch if I do not exceed 100 pounds in weight on it?
Hello, Fasia! No, this carrier would not fit a 1-1/4" receiver. Please consider the Curt Angled Shank Cargo Carrier, which is designed for use with your hitch class. Thank you!
Is this item for rent or for purchase?
Hi, Steve! This product is for purchase only. It is not available to rent. Thanks for asking!
Where is this cargo carrier made?
Hey Ab, this cargo carrier is made in the United States. Thanks for your question!
is there a receiver on carrier to add bike rack to the tray?
No. Sorry. There is not.
No. Sorry. There is not.
How much does the carrier weigh?
Our vendor for this products notes 33 pounds.
Are there tie down points anywhere on the carrier, such as the 3" sides?
Our buyer checked with the vendor and forwarded the following: "We do not put any tie down holes in the carrier but most folks uses the spacing under the carrier through the expanded mash to tie down. They can put the holes where they want them if they want to."
How do you strap things on the aluminum cargo carrier.
Quite honestly it would depend on what your cargo is. Depending on what you wish to strap down, you can choose the appropriate straps / ratchet from those available in our rope and tie down section. http://www.uhaul.com/MovingSupplies/Rope-tie-downs/
Is the deck solid or expanded aluminum
Hi Doug. The surface of the tray is expanded aluminum to allow debris and water to pass through. Have a great day!
I want to carry a SnoDog on this which is 56”x25” can it be returned if the SnoDog doesn’t fit ?
Hi Glenn, you can do a return however the inner dimensions are 59-5/8” x 23-5/8” x 2-3/4” so this one might be a tad small to set your SnoDog in.
Where is the carrier made? And how long is the hitch tongue?
Hello, Gary! This carrier was made in the USA. The distance from the center of the hitch pin hole to the carrier platform is 6". I hope that is helpful!
How much does it weigh?
Hey, Michael! This cargo carrier weighs 34 pounds. Thanks for asking!
Can you make aluminum hitch cargo carrier 70 inch long " 30 inch wide X 6-12 inch deep
Hi, Mike! Unfortunately, we do not offer any cargo carriers of that size. We apologize for the inconvenience!
What is the distance from hitch pin to basket?
Hello, Tim! The distance is 6 inches from the pin hole to the basket. I hope that is helpful!
I will be traveling with a power wheelchair due to my mobility issues I want a cargo van and I need a lift or a ramp 4 my Mobility device
Hi, Toni! Please see our selection of Wheelchair Carriers & Mobility Lifts. Thank you!
Is there any assembly required? Wondering about rattling going down the road...
Hi, Kristen! Besides attaching the carrier to your receiver hitch, this cargo carrier requires no assembly. Thank you!
How much does it weigh?
Hello! The carrier itself weighs about 35 pounds. Thanks for asking!
Can I have something like this to my 2002 Mitsubishi spyder?
Hello, Rose! This particular cargo carrier can be used with any vehicle equipped with a 2" receiver hitch. If your vehicle is not already equipped with a 2" receiver hitch, please visit your local U-Haul Hitch Center to have the appropriate hitch installed onto your vehicle. Thank you!
I would like to know if one can haul a motorcycle on these. In other words, I have an SUV and wonder if there would be a clearance problem. I have the shorter extension on my hitch. Can you tell me the distance from the ball to the farthest point on the platform? Thanks for your help.
Hello, Matt! No, we do not recommend using a cargo carrier to carry a motorcycle. Please consider renting a U-Haul motorcycle trailer for carrying a motorcycle. Thank you!
What are the inside measurements for the basket?
Hey, Larry! The inner dimensions of this cargo carrier are 60" x 24" x 3". Thank you!
How many bolts are included which would connect carrier to car hitch ? I have a 2" U-Haul installed trailer hitch on my 2014 Subaru Ouitback and wnt to be sure that this carrier is compatible with hitch and that bolts will work. Thank You !
Hi, Douglas! Please use the U-Haul Class III pin & Clip to secure your reciever hitch. Thank you!
Is there a ramp to mount a small scooter
Hi, Eduardo! We offer a variety of wheelchair carriers and mobility lifts. For a small scooter, we recommend the manual scooter and power chair universal lift. I hope that is helpful!
Can I use this on a Class 1 (200 lb) hitch if I do not exceed 100 pounds in weight on it?
Hello, Fasia! No, this carrier would not fit a 1-1/4" receiver. Please consider the Curt Angled Shank Cargo Carrier, which is designed for use with your hitch class. Thank you!
Is this item for rent or for purchase?
Hi, Steve! This product is for purchase only. It is not available to rent. Thanks for asking!
Where is this cargo carrier made?
Hey Ab, this cargo carrier is made in the United States. Thanks for your question!
is there a receiver on carrier to add bike rack to the tray?
No. Sorry. There is not.
No. Sorry. There is not.
How much does the carrier weigh?
Our vendor for this products notes 33 pounds.
Are there tie down points anywhere on the carrier, such as the 3" sides?
Our buyer checked with the vendor and forwarded the following: "We do not put any tie down holes in the carrier but most folks uses the spacing under the carrier through the expanded mash to tie down. They can put the holes where they want them if they want to."
How do you strap things on the aluminum cargo carrier.
Quite honestly it would depend on what your cargo is. Depending on what you wish to strap down, you can choose the appropriate straps / ratchet from those available in our rope and tie down section. http://www.uhaul.com/MovingSupplies/Rope-tie-downs/