Envío gratis en pedidos de más de $100 
Retiro en la tienda para precios más bajos en ciertos artículos
WILLIAM D.
- Rating:
Recommends this product
quality
Bolas de enganche y montajes Montajes de bola de enganche para remolque
Adaptador de receptor - Extensión de 6 in
Adaptador de receptor - Extensión de 6 in
Ten en cuenta
- No apto para remolcar. Solo para usar con bicicletas y accesorios.
Descripción
Descripción del producto
- Número de pieza:
- ADAPTER1
Unidad de una pieza para convertir el tamaño del tubo receptor de 1.25 in a 2 in. Se extiende 6 in.
- Te ofrece una extensión de 6 pulgadas
- Fácil de instalar
Comentarios (8)
Pamela K.
- Rating:
This item came in a timely manner…however…the hitch that was scheduled to be in stock and installed on Tuesday the 20th did not happen. The service install was scheduled for 7am. When the employee opened the door he was clueless as to why I was there. He did not know of the service order and when he went in the back to check for the hitch they did not have it in stock. Apparently he was never notified of the scheduled service. He is still looking for a hitch…I leave on Sat for vacation without being able to bring our bikes. When I called customer service…she found a hitch and suggested that I go pick it up and bring it to my local store…and not only pick it up (a 2-1/2hr drive one-way) I would need to purchase it…I have already purchased it when I set up the service online…she told me that I would still need to purchase another one and my local store could refund me??? This is an issue…and it is not okay
terry a.
- Rating:
should have come with the connecting pin or advised it was needed so I could have purchased it at the same time
Anonymous customer
- Rating:
It's fine but it does fit rather loosely and makes me nervous watching my bike rack on the back of my SUV
Anonymous customer
- Rating:
Haven't used it yet. Appears to be of good quality. Will have to cut the tow vehicle bumper to use it as the hitch receiver is behind the bumper and too high.
- 1
- 2
Questions & Answers (6)
Questions & Answers (6)
Product Description
- Part Number:
- ADAPTER1
One piece unit used for converting the size of the receiving tube from 1.25" to 2". Extends 6".
- Gives you a 6 inch extension
- Easy to install
Receiver Adapter - 6" extension Reviews (8)
WILLIAM D.
- Rating:
Recommends this product
quality
Pamela K.
- Rating:
This item came in a timely manner…however…the hitch that was scheduled to be in stock and installed on Tuesday the 20th did not happen. The service install was scheduled for 7am. When the employee opened the door he was clueless as to why I was there. He did not know of the service order and when he went in the back to check for the hitch they did not have it in stock. Apparently he was never notified of the scheduled service. He is still looking for a hitch…I leave on Sat for vacation without being able to bring our bikes. When I called customer service…she found a hitch and suggested that I go pick it up and bring it to my local store…and not only pick it up (a 2-1/2hr drive one-way) I would need to purchase it…I have already purchased it when I set up the service online…she told me that I would still need to purchase another one and my local store could refund me??? This is an issue…and it is not okay
terry a.
- Rating:
should have come with the connecting pin or advised it was needed so I could have purchased it at the same time
Anonymous customer
- Rating:
It's fine but it does fit rather loosely and makes me nervous watching my bike rack on the back of my SUV
Anonymous customer
- Rating:
Haven't used it yet. Appears to be of good quality. Will have to cut the tow vehicle bumper to use it as the hitch receiver is behind the bumper and too high.
- 1
- 2
Questions & Answers (6)
Hi ... I see a few questions re: Class I .. What I, & I think others may want to know, is many Class I Receivers have a Stopper inside the receiver shaft. My Hitch Stop has a distance of 422mm or 1.65354 Inches, between the Hitch Stop inside the shaft, to the centre of the Hitch Pin hole) ... Can you please provide Measurement from centre of 1-1/4-inch receiver Pin hole to the Trailer Hitch insert base ..... Just need to be sure it will fit without any grinding needed etc ...
Hi PJ! Sorry for the delay. To answer your question, the measurement from the end of the 1/4" shank to the center of the 1/2" pin hole is 1-1/2". I hope that helps! Have a great day!!
Will this work with a class I hitch? All adapters I am finding so far will only fit a class II adapter
Hi, Raymond! This adapter fits 1-1/4" receiver hitches. Thanks for asking!
Can you tow a small trailer with this?
Hello, Eric! No, this adapter cannot be used for towing. It can only be used for small accessories such as a bike rack or cargo carrier. Thanks for asking!
What pin would you would you recommend for the 1.25" to 2". Extends 6" or the 1.25" to 2". Extends 10"? Please advise, thanks!
Is this adapter designed to be inserted into Class I hitch receivers?
The 350 lbs rated adapter converts an 1-1/4" receiver tube opening to a 2" opening. Please note that your hitch system (receiver hitch, ball mount, ball, accessories) is only as strong as its lowest rated component.
What is the weight limit of this adapter? For accessories? Not towing.
"The ADAPTER1 maximum tongue weight rating is 350 lbs"
Recommended Items
Check Store Availability
Receiver Adapter - 6" extension
Receiver Adapter - 6" extension
Buy Online, Pick up in Store orders are typically ready for pick up within two hours of submitting an order. Orders placed after store hours will be ready for pick up the next day. In-Store availability is based on the store inventory and is typically updated every two hours. Orders are held for four days after processing.
Hi ... I see a few questions re: Class I .. What I, & I think others may want to know, is many Class I Receivers have a Stopper inside the receiver shaft. My Hitch Stop has a distance of 422mm or 1.65354 Inches, between the Hitch Stop inside the shaft, to the centre of the Hitch Pin hole) ... Can you please provide Measurement from centre of 1-1/4-inch receiver Pin hole to the Trailer Hitch insert base ..... Just need to be sure it will fit without any grinding needed etc ...
Hi PJ! Sorry for the delay. To answer your question, the measurement from the end of the 1/4" shank to the center of the 1/2" pin hole is 1-1/2". I hope that helps! Have a great day!!
Will this work with a class I hitch? All adapters I am finding so far will only fit a class II adapter
Hi, Raymond! This adapter fits 1-1/4" receiver hitches. Thanks for asking!
Can you tow a small trailer with this?
Hello, Eric! No, this adapter cannot be used for towing. It can only be used for small accessories such as a bike rack or cargo carrier. Thanks for asking!
What pin would you would you recommend for the 1.25" to 2". Extends 6" or the 1.25" to 2". Extends 10"? Please advise, thanks!
Please use U-Haul 1/2" diameter pin & clip part 3130 and 5/8" diameter pin & clip part 3131.
Is this adapter designed to be inserted into Class I hitch receivers?
The 350 lbs rated adapter converts an 1-1/4" receiver tube opening to a 2" opening. Please note that your hitch system (receiver hitch, ball mount, ball, accessories) is only as strong as its lowest rated component.
What is the weight limit of this adapter? For accessories? Not towing.
"The ADAPTER1 maximum tongue weight rating is 350 lbs"